G4 Blazing Hog MM Size?

Internals, Tips and Tricks for your G4

Moderator: ASGI Tim

Posts: 1
Joined: Wed Jan 18, 2012 2:42 pm
HumanQuestion: Yes
HumanQuestion2: yes
Location: San Diego

G4 Blazing Hog MM Size?

Postby daring5000 » Wed Jan 18, 2012 2:49 pm

I noticed that the new Modify High Speed Gear Sets are set to come back in stock next week.

http://www.airsoftgi.com/product_info.p ... ts_id=5335

http://www.airsoftgi.com/product_info.p ... ts_id=5337

My question is which would fit into a G4 mechbox, the 6mm or 7mm?

I would also like to know how I can find out on my own the mm size of a gearbox is? Is there a specific place to measure? For example a VFC CQBR?

Thanks for any info.
User avatar
Jeweled General
Posts: 4506
Joined: Mon Jun 27, 2011 11:25 pm
HumanQuestion: Yes
HumanQuestion2: bah
Location: SDCA

Re: G4 Blazing Hog MM Size?

Postby tylerflow » Mon Jan 23, 2012 9:38 pm

The G4 gearbox is 8mm.

The size is for the bushings/bearings.

You don't want to put these into a G4 without some other seriously needed upgrades.

Return to “G4 Internal”

Who is online

Users browsing this forum: No registered users and 3 guests