New letter to AirsoftGi abouy creating new GI guns.

[racerx8000]

yea they could have a mp5 with a drum mag and a ris system and a folding stock, it would be the ultimate cqb wep(it should include a high speed motor also).

[baklash 1337]

I would like to see this happen. But in no way am I in the market for one. I just want this to happen for others.

[tallplayer43]

IMO i think they should expand beyond the low end guns are start customizing kwa or vfc instead of charging like 350 for jg base you know? but thats just me

[racerx8000]

most of their guns are g&g, so they are right in the middle quality wise, so it think the quality is fine.

[Mr. OM-NOM]

IMO i think they should expand beyond the low end guns are start customizing kwa or vfc instead of charging like 350 for jg base you know? but thats just me

first off, no G4 is above $300, most are between $200 and $250. the Base is a G&G, with a nylon receiver, not a ABS one. and the G&G they use has had some GI cutsom requests, including a higher power spring (350 instead of 320), different bushings (the ones that come on normal G&G CM guns are crap. trust me. they shatter.), and i believe a different wire set, but cant confirm. they dont have JG grey ABS externals, and dont have JG/XYT gears. the gears even say G&G. if you've even watched a video from GITV on the G4, they say its made from a G&G base.

[Nokrot]

IMO i think they should expand beyond the low end guns are start customizing kwa or vfc instead of charging like 350 for jg base you know? but thats just me

first off, no G4 is above $300, most are between $200 and $250. the Base is a G&G, with a nylon receiver, not a ABS one. and the G&G they use has had some GI cutsom requests, including a higher power spring (350 instead of 320), different bushings (the ones that come on normal G&G CM guns are crap. trust me. they shatter.), and i believe a different wire set, but cant confirm. they dont have JG grey ABS externals, and dont have JG/XYT gears. the gears even say G&G. if you've even watched a video from GITV on the G4, they say its made from a G&G base.

Yeah if they were made with a JG base i wouldn't have touched a G4 with a ten foot pole

[xxx.jakk.xxx]

A lot of the "GI" guns, not G4 series, are made from a JG base.


M4
http://www.airsoftgi.com/product_info.p ... ts_id=4828 - $270 with a JG Base
http://www.airsoftgi.com/product_info.p ... ts_id=4829 - $270 with a JG Base
http://www.airsoftgi.com/product_info.p ... ts_id=2380 - $295 with a JG Base
http://www.airsoftgi.com/product_info.p ... ts_id=4818 - $250 with a AGM Base
http://www.airsoftgi.com/product_info.p ... ts_id=5787 - $260 with a AGM Base
http://www.airsoftgi.com/product_info.p ... ts_id=4830 - $300 with a Echo1 Base

G36
http://www.airsoftgi.com/product_info.p ... ts_id=2742 - $335 with a Echo1 Base (Out of stock)
http://www.airsoftgi.com/product_info.p ... ts_id=4120 - $245 with a JG Base (M4/G36 Hybrid)

Thompson
http://www.airsoftgi.com/product_info.p ... ts_id=4588 - $225 with a CYMA Base

AK
http://www.airsoftgi.com/product_info.p ... ts_id=4412 - $600 with a JG Base (Holy SH*T)


There were tons more of non G&G base models for more than i had mentioned, but it does kind of show what had been mentioned. I know that for the extras, it is an OK deal, but for a JG, I would hate to spend $270+, especially when I can spend that or less for the G&G base models. Also, I made sure to do more than just the M4, but the rest were pretty difficult to find. Lol

[adog12341]

Then again, they were created before the Combat Machine was even out, so they basicly had to use a jg base.

[xxx.jakk.xxx]

Then again, they were created before the Combat Machine was even out, so they basicly had to use a jg base.

They were from before, but that doesn't mean that they had to go with the cheapest brand that isn't considered a waste of space.

[adog12341]

Agreed, but back then(like, 2007), thats all they had for a cheap base gun.